Leveling feeder, stainless steel plate stamping, Dongguan automatic leveling device
At present, many processing and manufacturing industries need to use cut and cut sheets for processing, and the precision of shearing and cutting directly affects the quality and production cost of the products. As the processing and manufacturing industry demands higher and higher quality products.
As a result, the cutting precision when cutting and cutting is more and more demanded. When using the shearing machine to cut the material, only the high precision and high quality positioning can fully exert the maximum economic benefit.
The current common combination of cutting automatic production line is heavy material frame + leveling machine + NC feeder combined with shearing machine to realize automatic shearing and cutting production, but this automatic production line can only be used to locate raw materials with low requirements. Cut.
The main reasons are as follows: First, the structure of the traditional NC feeder has limitations - single-pressure feeding roller, the diameter of the feeding stick will be unevenly changed due to wear and the like during long-term use, and the conveyed In the case where there is a difference in the thickness of the two sides of the material, the material that is cut off inevitably produces a diagonal error.
Second, as the number of shears increases in the same roll, the deviation is also getting larger and larger, so that it cannot work normally. It must be stopped at any time, and the error is corrected manually, which affects the quality of the product and also affects the shear rate.
The double servo NC feeder changes the structure of the feeding mechanism, and changes the original set of servo feeding mechanism into two sets of symmetric matching and independent feeding mechanisms. The original integral roller feeds the two sides of the pressure roller. Feeding.
Through the sensor tracking, PLC control, the diagonal error of the shearing material is controlled within the allowable error range of the product, eliminating the error that the original product cannot eliminate.
Moreover, the double servo NC feeder feed roller can maintain the cutting precision even if it is worn during the production process due to its unique detection method and rich servo system software support.
Therefore, Ruihui double servo NC feeder not only has automatic rectification function, but also has fast material conveying speed and high cutting precision, which is suitable for the demand of high precision machining.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 |
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 |
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 |
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |
| Coil I.D.(mm) | 8 | 8 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 |
| Work Roll Number(pieces) | upper 6
lower 5 | upper 6
lower 5 | upper 6
lower 5 | upper 6
lower 5 |
| Feed Roll Number(set) | 1 | 1 | 1 | 1 |
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic |
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ |
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) |
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 |
| 0.6 |
| 0.8 |
| 1.0 |
| 1.2 |
| 1.4 |
| 1.6 | 470 | 470 |
| 1.8 | 400 | 400 |
| 2.0 | 360 | 360 |
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.
Product Tags:
|
|
Precision Leveling Decoiler Straightener Feeder Stainless Steel Plate Stamping Images
|
